solidworks 2008 x64 加载 comsol 接口插件文件 flswinterface.dll

wanglili8452 · 发表于 2008-3-10 20:40:53

经典图书

【求助】solidworks 2008 x64 加载 comsol 3.4 x64 接口插件文件 flswinterface.dll 文件
查阅资料说在 solidworks 2008 x64 和 comsol 3.4 x64 软件之间有无缝连接实时得接口。在comsol 3.4 x64 下面打开 “文件” 菜单，然后选择 “solidworks 连接” ，然后选择 “初始化” 。提示错误 2058 ，连接solidworks 失败。我查阅了一下comsol 安装文件说明。如下

Adding the SolidWorks Live Connection to the CAD Import Module
If you have bought the CAD Import Module, the COMSOL Installer adds an add-in
to SolidWorks called the COMSOL Multiphysics Interface. This add-in should appear on
the SolidWorks user interface in the Add-Ins list that appears under the Tools menu.
The connection between COMSOL and SolidWorks can fail if SolidWorks is installed
after COMSOL or if you make manual changes to the Windows registry. In the case
of such a failure, it is possible to set up the connection as follows:
1 In SolidWorks, go to the File menu and choose Open.
2 In the Files of type list select Add-Ins (*.dll).
3 Load the file flswinterface.dll from the directory libwin32 under the
COMSOL 3.4 installation directory.

按照其中的说明，我在 solidworks 2008 x64 中选择 “插件” 在 “插件”列表中看不到 comsol multiphsysics 这个插件。
于是点击 “文件” 在如下路径 D:COMSOL34libwin64flswinterface.dll
双击安装后， solidworks 2008 x64 软件提示无法启动插件。

恳请那位知道64位软件下面两个软件得连接。恳请指点一下。

		自动登录	找回密码
密码			立即注册